| CuttingSheets can be cut using a fine tooth handsaw, circular saw with a fine tooth metal blade at low speeds or an abrasive wheel. Cutting produces dust, which should be, removed either by a vacuum cleaner or an air gun.
Fastening Position Knee Fasteners on the side of the sheet ready to receive the next. Knee fasteners are suitable for fitting to both purlins and rafters. If fitting to metal framework use rivets or 35mm wafer head screws should be used for timber framework. Roof Fall A minimum pitch of 5° is recommended (87mm/1000mm). |
| Profile | Min.Curving Radius | Max. Overhang | Max. End Span | Max. Mid Span |
| Danpalon 4mm Compact | 2900mm | 50mm | 700mm | 900mm |
| Danpalon 8mm Honeycomb | 2200mm | 50mm | 700mm | 900mm |
| Danpalon 10mm Honeycomb | 2500mm | 50mm | 1000mm | 1100mm |
| Danpalon 16mm Multicell | 2900mm | 50mm | 900mm | 1300mm |